ADTECH New Product 3 Axis Engraving Control System

ADTECH have launched new product 3 Axis Engraving Control System to overseas market last week. The engraving control system has achieved a good reputation in Chinese market, so the managers decided to provide engraving control system solution to international market.

DK300A is a cost-effective and stable engraving control system, the CPU is ARM9, and FPGA for motion control, so it is high response and precision. It support several kind of communications (USB, RS232, RJ45-network); realize remote control and DNC function. This engraving machine controller can be used for all kind of engraving machine (wood/stone/advertisement/glass engraving machine)

DK300A Feature:

The engraving control system have three axis control X, Y, Z, A aixs, μm interpolation accuracy;

Support MasterCAM, Type 3, ArtCam, UG, PROE software for program;

Pretreat motion processing with rapid and intelligent speed, program very stable;

The max rapid speed can reach 60m/min; Max feed speed can reach 30m/min;

Program in common function pattern, is simple and easily to use;

Support USB, U disk, RS232 COM communication, help customer realize difference data transmission or software upgrade;

Open platform, can customize system for customer’s special requirement;

With complete self-diagnostic function, internal and external real-time display, it will show alarm if any unusual arise.  

Form Parameter
Input and output addresses number can be arbitrarily set, just fill the corresponding value in the adress bar of configuration table

Multi-Interface Options

Supports multilingual interface display, automatic fault alarm. Rich processing information display, processing time, number of pieces


Easy to Install

Reliable structure, all interfaces are standard DB connector

Optional Accessories
Additional panels, handheld box, stepper, servo unit

Standard Accessories
Input and output wiring boards

As the leading manufacturer of total motion control solution on China, ADTECH establishes two product systems: motion control system including motion controller, stepper & servo motor and driver; CNC equipment (industrial robot, teaching lathe & miller). Good after-service is available and we have more than ten years’ experience in this industry. Good quality and good service are our advantages. We expect cooperation with you!

ACL Series Low-Voltage Servo Motor

  ADTECH ACL series is AC permanent magnet servo motor. It’s new product to meet the markets’ needs. Its better in function compared with brushless DC motor and it’s cheaper compared with normal AC servo motor due to its low-voltage. Compared with the stepper motor, it has high speed, high precision, and no cogging force, with position feedback.
It’s with 2500ppr optical encoder and ensures accuracy & appropriate speed. Be compatible in mounting structure with Panasonic’s 60 flange series of servo motor and easier to replace. It can be used in medical devices for safety-critical applications due to its low-voltage and it’s safer to be used.
Below is Model & Dimensions:

Model	Rated Output	Shaft Diameter
ACL-06010A-2A	100W	8
ACL-06010A-2B		11

ACL servo motor can match with our own low-voltage servo driver QS2 series (is also ADTECH new product). Our QS2 series servo driver is specially designed to match ACL series motor. We can serve a complete servo system to customers and our warranty time is one year.
As the leading manufacturer of total motion control solution on China, ADTECH establishes two product systems: motion control system including motion controller, stepper & servo motor and driver; CNC equipment (industrial robot, teaching lathe & miller). Good after-service is available and we have more than ten years’ experience in this industry. Good quality and good service are our advantages. We expect cooperation with you!

ADTECH QS7 Series AC Servo Driver(New Products)

  ADTECH QS7 series AC servo driver is a new generation of product our company launched at year of 2012 and is the result of optimization and improvement based on our QS6 series servo driver. It keeps the good quality of QS6 series servo motor driver and is more stable and convenient for use.
QS7 servo motor driver has FPGA software platform with high-performance, the best wiring design and profound understanding about space vector control algorithm (SVPWM), application with the best wiring design. Our company’s servo driver has reached a new height with QS7 after experiencing 7-years and 3-gernertaion’s steeling. It can easily solve shaking, interference and other industrial site issues with its built-in various smoothing, filtering, instruct-following algorithm. It has subsection control mode switching, electronic gear ration, MODBUS multi-axis linkage and other functions. So it can be flexibly used in all kinds of situations and meet needs of diversity. The function of newly added automatic moment of inertia identification simplify the setting steps and it only need a few step to get good results.

Below its characteristics:

1. more stable, rich and complete data

2. newly increased 485 communication function , more convenient and reliable in connection with upper computer software and controller

3. single-power supply (QS7AA050M2 is double-power supply) , simplify power supply, convenient to wiring and save cost

4. rich specification and model, rated power covers from 100W to 3.8KW, can meet needs of various industries

5. with Intelligent power module device; overall optimization in compact structure, wiring, port; strong anti-interference ability

6. parameters setting, mechanical size, encoder port, power supply port is completely compatible with QS6 series, give convenience to old customer to update

7. newly increased automatic inertia indentification to make setting more convenient.

This is new servo drivers products from ADTECH, we except to your attention. 

Chinese Market for Low Voltage AC Motor Drives and DC Motor Drives Enters Period of Steady Growth

According to a recent IMS Research study, The Chinese Market for Low Voltage Motor Drives - 2012 Edition, revenue growth in this market slowed considerably in 2011 from an abnormally high 2010. Revenues from motor drives (excluding software and services) are projected to grow at a compound annual growth rate (CAGR) of 13.7 percent from 2010 to 2015.

The total Chinese market for low-voltage AC & DC motor drives (including software and services) was estimated at $2.68 billion in 2010. The Chinese Government’s RMB 4000 billion stimulation policy and other domestic consumption policies enabled healthy growth in the market to continue from 2009 to 2010.

“In the first half of 2011, the markets for low voltage motor drives were still growing strongly. In the second half of 2011, as the Chinese Government tightened monetary policies and imposed strict lending conditions; this caused delays in numerous large projects, such as high-speed railways, city metros, highways, and factory renovation projects. These policies are also causing financial strain for both end users and machine builders”, commented Wilmer Zhou, senior analyst and report author. In June 2011, the market went into a precipitous decline. The bad news first came from local small and medium machine builders in South and East China; many reported no new orders during the second half of the year and many small machine builders went bankrupt and closed. The low-voltage motor drive market has been more affected than that for the medium-voltage drives, because of its greater dependence on machine builders. Nevertheless, with $3.1 billion in revenues in 2011, China still accounted for 25 percent of the world market for low voltage motor drives.

The new report found that ABB and Siemens were the market leaders in the Chinese low voltage motor drive market in 2011, with 16 percent and 13 percent share respectively. Market leadership is concentrated, as the top five suppliers accounted for nearly 46 percent of the total. However, there is a large tail of suppliers, each with less than 1 percent of the total revenues. Wilmer states, “Because of the Japanese earthquake, component shortages, and other reasons such as the appreciation of the Japanese Yen in 2011, European and local Chinese suppliers are taking share from several Japanese suppliers.”

Growth in the Chinese market will continue, because of implementation of policies regarding motor  and motor driver efficiency and energy-saving renovations in various industries. But market growth will be at a lower rate than in the past few years as investment is reduced in the near future, with concerns over high inflation in China.

ADTECH CNC Control System on Automation Dispensing/Gluing Machine

ADTECH designs kinds of CNC control system for automatic dispensing/gluing machines, wire coiling machines, etc. ADTECH controller has a very good reputation in the field of CNC machine tools.

CNC Control System used in Automation Dispensing/Gluing Machine

1. Application Background
With the high speed development of semiconductor, electronic components, LCD manufacturing, LED production, making adornments, such as toys and clothes, has high and strict requirements on the technology, yield and quality of dispensing/gluing. Manually dispensing/gluing cannot meet those requirements already. Then automatic dispensing/gluing control systems and equipments appear.

2. System Introduction
CNC control systems for dispensing/gluing machine are high cost-effective fruit of ADTECH R&D team. They are divided into two kinds：fission type and touch-screen type. These systems realize full 3D precise processing, support teaching way data input and support graphics importing function (PLT, TCF, G CODE). Its simple teaching mode and humanized operation greatly improve production efficiency. These systems use smooth curve to adjust speed, which can make the machine’s running more smooth, low the machine’s noise and prolong the machine’s life. The systems are widely used in mobile phone key-press, horn, relays, IC packaging, conductive rubber, etc.

3. CNC Control System Principle and Configuration

1. TV5500 Handheld box
2. ADT-8848 stand-alone motion controller
3. 24V DC switch power supply
4. step/servo driver
5. step/servo motor
6. Input keys and sensors (self-provided)
7. Glue valve suite relay, cylinder valves, glue valves and glue pressure bucket ）（self-provided）

4.Comments
CNC control system for dispensing machine, fission type and touch-screen type, realize full 3D and high precision motion control. It provides user with rich instruction set, including line, arc, single point, ellipse movement instructions and other kind of instructions, such as port’s output, waiting input, delay pause, choosing glue guns, motor reset, files’calls, increasing offset, program jump and so on. It also provides rich senior edit functions, including batch modify, copy, graphic array translation, graphics zoom, automatic edges and commonly used graphics library, etc. The systems not only support input coordinates manually and teaching inputting, but also support import graphics through PC (you can transform graphics on PC to PLT, TCF or G codes firstly, then transform the files on controller to processing files.) The storage space of the controller is 256M; each file can store 100000 processing points.
The systems also support serial port, USB and network communication.